View MMKP38308_4600549.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
168x12(halfpage) l h lt P dt 10 F' (1) F w l h h' w
FEATURES
7.5 mm bent back pitch. 15 mm to 27.5 mm lead pitch. Low contact resistance. Low loss dielectric. Small dimensions for high density packaging. Supplied loose in box and taped on reel RoHS-compliant product
H
dt
ENCAPSULATION
15
Dimensions in mm
(1) F - F' < 0.3 mm F = 7.5 + 0.6/- 0.1 mm
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
CLIMATIC CATEGORY
55/105/56
APPLICATIONS
Where steep pulses occur e.g. SMPS (switch mode power supplies). Electronic lighting e.g. Ballast. Motor control circuits. S-correction. For flyback applications please use 1400 V series.
CAPACITANCE RANGE (E24 SERIES)
0.001 to 2.7 F
CAPACITANCE TOLERANCE
5%
REFERENCE SPECIFICATIONS
IEC 60384-17
LEADS
Tinned wire
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer's type; code for dielectric material; code for factory of origin; manufacturer; year and week of manufacture
RATED (DC) TEMPERATURE
85 C
DIELECTRIC
Polypropylene film
RATED (AC) TEMPERATURE
105 C
ELECTRODES
Metallized
MAXIMUM APPLICATION TEMPERATURE
105 C
ENCAPSULATION
Flame retardant plastic case and epoxy resin
DETAIL SPECIFICATION
For more detailed data and test requirements contact: dc-film@vishay.com
CONSTRUCTION
Internal serial construction
RATED (DC) VOLTAGE
250 V; 400 V; 630 V; 1000 V; 1400 V;1600 V; 2000 V; 2500 V
RATED (AC) VOLTAGE
125 V; 200 V; 220 V; 350 V; 500 V; 550 V; 700 V; 900 V
RATED PEAK-TO-PEAK VOLTAGE
350 V; 560 V; 630 V; 1000 V; 1400 V; 1600 V; 2000 V; 2500 V
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 1
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES 15.0 mm/7.5 mm 383 15.0 mm 22.5 mm 27.5 mm Example: 104 = 10 x 10 = 100 nF CAPACITANCE (numerically) MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
BFC2 2222(1)
(1) Old
383 383
XX YY Y XX YY Y
PREFERRED TYPES C-TOL. 250 V 5% 5% 00 03 400 V 10 13 630 V 20 23 1000 V 1400 V 30 33 40 43 1600 V 50 53 2000 V 60 63 2500 V 70 -
ordering code
TYPE
PACKAGING
LEAD CONFIGURATION
383
Loose in box Lead length 3.5 mm 0.3 mm Taped on reel H = 16.0 mm; P0 = 15.0 mm (bent back to 7.5 reel diameter = 500 mm mm) (1) Lead length 5.0 mm 1.0 Lead length 25.0 mm 2.0 H = 18.5 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 356 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 500 mm
Dimensions of this code numbers stay between brackets ON REQUEST 01 04 02 05 11 14 12 15 21 24 22 25 31 34 32 35 41 44 42 45 51 54 52 55 61 64 62 65 71 74 72 -
Loose in box Taped on reel (1) Taped on reel (bent back to 7.5 mm) (1) Taped on reel (bent back to 10.0 mm) (1)
5% 5% 5% 5% 5%
383
Dimensions of this code numbers stay between brackets 08 18 28 38 48 58 68 -
Notes (1) For detailed tape specifications refer to "Packaging Information" www. vishay.com/doc?28139 or end of catalog (2) SPQ = standard packaging quantity
SPECIFIC REFERENCE DATA (250 Vdc)
DESCRIPTION Tangent of loss angle: C 0.15 F 0.15 F < C 0.39 F 0.39 F < C 0.56 F 0.56 F < C 0.82 F 0.82 F < C 1.2 F 1.2 F < C 1.8 F 1.8 F < C 2.2 F 2.2 F < C 2.7 F Rated voltage pulse slope (dU/dt)R: C 0.15 F 0.15 F < C 0.39 F 0.39 F < C 0.82 F 0.82 F < C 2 F 2 F < C 2.7 F R between leads, for C 1 F at 100 V; 1 min RC between leads, for C >1 F at 100 V; 1 min R between leads and case; 100 V; 1 min Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum application temperature www.vishay.com 2 VALUE at 10 kHz 5 x 10-4 5 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 15 x 10-4 15 x 10-4 450 V/s 900 V/s 290 V/s 190 V/s 130 V/s > 100 000 M > 100 000 s > 30 000 M > 220 V 400 V; 1 min 2840 V; 1 min 105 C Document Number: 28124 Revision: 05-Nov-08 at 100 kHz 20 x 10-4 25 x 10-4 25 x 10-4 40 x 10-4 50 x 10-4 65 x 10-4 75 x 10-4 85 x 10-4
For technical questions, contact: dc-film@vishay.com
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 250 V; URac = 125 V; Upp = 350 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL DIMENSIONS MASS C Pitch = 7.5 mm (bent back) Leads Leads w x h (h') x l (g) (1) 3.5 0.3 mm 25.0 2.0 mm Original pitch (F) O 500 mm O 356 mm (mm) XX XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm Pitch = 7.5 mm (bent back) Pitch = 15 mm 0.082 00... 04... 02... 03... 05... 5.0 x 11.0 (13.0) x 17.5 1.1 0.091 (1250) (1000) (1100) (950) (550) 0.1 0.11 00... 04... 02... 03... 05... 0.12 6.0 x 12.0 (14.0) x 17.5 1.4 (1000) (1000) (900) (800) (450) 0.13 0.15 0.16 00... 04... 02... 03... 05... 7.0 x 13.5 (15.5) x 17.5 1.8 0.18 (750) (500) (800) (700) (400) 0.2 0.22 00... 04... 02... 03... 05... 0.24 8.5 x 15.0 (17.0) x 17.5 2.6 (750) (500) (650) (550) (300) 0.27 0.3 0.33 00... 04... 02... 03... 05... 10.0 x 16.5 (18.5) x 17.5 3.3 0.36 (500) (450) (600) (500) (250) 0.39 Note (1) Net weight for short lead products only URdc = 250 V; URac = 125 V; Upp = 350 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL C-VALUE Leads Leads Original pitch 3.5 0.3 mm 25.0 2.0 mm ..YYY XX XX XX (SPQ) (SPQ) (SPQ) 00... (200) 00... (200) 00... (200) 04... (250) 04... (250) 04... (200) Pitch = 22.5 mm 02... (550) 02... (450) 02... (350) Pitch = 27.5 mm 00... (750) 00... (500) 00... (100) 00... (100) 04... (125) 04... (125) 00... (125) 00... (100) 914 105 115 125 135 155 165 185 205 225 245 275 C-VALUE ..YYY
Vishay BCcomponents
823 913 104 114 124 134 154 164 184 204 224 244 274 304 334 364 394
C (F)
DIMENSIONS wxhxl (mm)
MASS (g) (1)
Pitch = 22.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.43 7.0 x 116.5 x 26.0 3.0
434 474 514 564 624 684 754 824
0.47 0.51 8.5 x 18.0 x 26.0 4.2 0.56 0.62 0.68 10.0 x 19.5 x 26.0 5.3 0.75 0.82 Pitch = 27.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.91 1.0 11.0 x 21.0 x 31.0 8.0 1.1 1.2 1.3 13.0 x 23.0 x 31.0 9.7 1.5 1.6 1.8 15.0 x 25.0 x 31.0 12.6 2.0 2.2 16.3 2.4 18.0 x 28.0 x 31.0 2.7 Note (1) Net weight for short lead products only
-
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 3
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (400 Vdc)
DESCRIPTION Tangent of loss angle: C 0.22 F 0.22 F < C 0.33 F 0.33 F < C 0.43 F 0.43 F < C 0.68 F 0.68 F < C 0.82 F 0.82 F < C 1.2 F 1.2 F < C 1.5 F Rated voltage pulse slope (dU/dt)R: C 0.082 F 0.082 F < C 0.22 F 0.22 F < C 0.43 F 0.42 F < C 1.1 F 1.1 F < C 1.5 F R between leads, for C 1 F at 100 V; 1 min RC between leads, for C >1 F at 100 V; 1 min R between leads and case; 100 V; 1 min Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum aplication temperature VALUE at 10 kHz 5 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 600 V/s 1200 V/s 410 V/s 260 V/s 180 V/s > 100 000 M > 100 000 s > 30 000 M > 220 V 560 V; 1 min 2840 V; 1 min 105 C at 100 kHz 20 x 10-4 35 x 10-4 40 x 10-4 50 x 10-4 55 x 10-4 60 x 10-4 65 x 10-4
URdc = 400 V; URac = 200 V; Upp = 560 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL C-VALUE DIMENSIONS C MASS Pitch = 7.5 mm (bent back) Leads Leads w x h (h') x l (F) (g) (1) 3.5 0.3 mm 25.0 2.0 mm Original pitch O 500 mm O 356 mm (mm) ..YYY XX XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm Pitch = 15 mm Pitch = 7.5 mm (bent back) 0.047 473 10... 14... 12... 13... 15... 5.0 x 11.0 (13.0) x 17.5 1.1 0.051 513 (1250) (1000) (1100) (950) (550) 0.056 563 0.062 623 0.068 683 10... 14... 12... 13... 15... 6.0 x 12.0 (14.0) x 17.5 1.4 (1000) (1000) (900) (800) (450) 0.075 753 0.082 823 0.091 913 10... 14... 12... 13... 15... 7.0 x 13.5 (15.5) x 17.5 1.8 0.1 104 (750) (500) (800) (700) (400) 0.11 114 124 0.12 0.13 134 10... 14... 12... 13... 15... 8.5 x 15.0 (17.0) x 17.5 2.5 (750) (500) (650) (550) (300) 0.15 154 0.16 164 184 0.18 15... 10... 14... 12... 13... 10.0 x 16.5 (18.5) x 17.5 3.3 0.2 204 (500) (250) (500) (450) (600) 0.22 224 Note (1) Net weight for short lead products only
www.vishay.com 4
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 400 V; URac = 200 ; Up-p = 560 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL C-VALUE Leads Leads Original pitch 3.5 0.3 mm 25.0 2.0 mm ..YYY XX XX XX (SPQ) (SPQ) (SPQ) 10... (200) 10... (200) 10... (200) 14... (250) 14... (250) 14... (200) Pitch = 22.5 mm 12... (550) 12... (450) 12... (350) Pitch = 27.5 mm 10... (100) 10... (100) 10... (100) 10... (100) 14... (125) 14... (125) 14... (125) 14... (100) 474 514 564 624 684 754 824 914 105 115 125 135 155 244 274 304 334 364 394 434
Vishay BCcomponents
C (F)
DIMENSIONS wxhxl (mm)
MASS (g) (1)
Pitch = 22.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.24 7.0 x 116.5 x 26.0 3.0
0.27 8.5 x 18.0 x 26.0 4.2 0.30 0.33 0.36 10.0 x 19.5 x 26.0 5.3 0.39 0.43 Pitch = 27.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.47 0.51 11.0 x 21.0 x 31.0 8.0 0.56 0.62 0.68 13.0 x 23.0 x 31.0 9.7 0.75 0.82 0.91 15.0 x 25.0 x 31.0 12.6 1. 1.1 1.2 18.0 x 28.0 x 31.0 1.3 16.3 1.5 Note (1) Net weight for short lead products only
-
SPECIFIC REFERENCE DATA (630 Vdc)
DESCRIPTION Tangent of loss angle: C 0.15 F 0.15 F < C 0.22 F 0.22 F < C 0.3 F 0.3 F < C 0.47 F 0.47 F < C 0.68 F 0.68 F < C 1.0 F Rated voltage pulse slope (dU/dt)R: C 0.024 F 0.024 F < C 0.062 F 0.062 F < C 0.13 F 0.13 F < C 0.33 F 0.33 F < C 0.47 F R between leads, for C 1 F at 100 V; 1 min R between leads and case; 100 V; 1 min Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum application temperature VALUE at 10 kHz 5 x 10-4 8 x 10-4 8 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 1700 V/s 3300 V/s 1200 V/s 700 V/s 470 V/s > 100 000 M > 30 000 M > 440 V 1600 V; 1 min 2840 V; 1 min 105 C at 100 kHz 15 x 10-4 25 x 10-4 30 x 10-4 40 x 10-4 45 x 10-4 50 x 10-4
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 5
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 630 V; URac = 220 V; Up-p = 630 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL C-VALUE DIMENSIONS C MASS Pitch = 7.5 mm (bent back) Leads Leads w x h (h') x l Original pitch (g) (1) (F) 3.5 0.3 mm 25.0 2.0 mm O 500 mm O 356 mm (mm) ..YYY XX XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm Pitch = 15 mm Pitch = 7.5 mm (bent back) 0.03 303 20... 24... 22... 23... 25... 5.0 x 11.0 (13.0) x 17.5 1.1 0.033 333 (1250) (1000) (2200) (950) (550) 0.036 363 393 0.039 0.043 433 20... 24... 22... 23... 25... 6.0 x 12.0 (14.0) x 17.5 1.4 0.047 473 (1000) (1000) (900) (800) (450) 0.051 513 0.056 563 0.062 623 20... 24... 22... 23... 25... 7.0 x 13.5 (15.5) x 17.5 1.8 0.068 683 (750) (500) (800) (700) (400) 0.075 753 0.082 823 0.091 913 20... 24... 22... 23... 25... 8.5 x 15.0 (17.0) x 17.5 2.5 (750) (500) (650) (550) (300) 0.1 104 0.11 114 124 0.12 23... 25... 20... 24... 22... 10.0 x 16.5 (18.5) x 17.5 3.3 0.13 134 (600) (500) (250) (500) (450) 0.15 154 Pitch = 22.5 mm Pitch = 22.5 mm 0.4 mm; dt = 0.80 0.08 mm 164 0.16 0.18 184 20... 24... 22... 8.5 x 18.0 x 26.0 4.2 (200) (250) (450) 0.2 204 0.22 224 174 0.24 24... 22... 20... 10.0 x 19.5 x 26.0 5.3 0.27 304 (200) (200) (350) 0.3 Pitch = 27.5 mm Pitch = 27.5 mm 0.4 mm; dt = 0.80 0.08 mm 334 0.33 0.36 364 20... 24... 11.0 x 21.0 x 31.0 8.0 (750) (125) 0.39 394 0.43 434 474 0.47 20... 24... 13.0 x 23.0 x 31.0 9.7 0.51 514 (500) (125) 0.56 564 0.62 20... 24... 624 (100) (125) 15.0 x 25.0 x 31.0 12.6 0.68 684 0.75 754 824 0.82 20... 24... 18.0 x 28.0 x 31.0 16.3 0.91 914 (100) (100) 1.0 105 Note (1) Net weight for short lead products only
www.vishay.com 6
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (1000 Vdc)
DESCRIPTION Tangent of loss angle: C 0.062 F 0.062 F < C 0.13 F 0.13 F < C 0.22 F 0.22 F < C 0.33 F 0.33 F < C 0.47 F Rated voltage pulse slope (dU/dt)R: C 0.024 F 0.024 F < C 0.062 F 0.062 F < C 0.13 F 0.13 F < C 0.33 F 0.33 F < C 0.47 F R between leads, for C 1 F at 500 V; 1 min R between leads and case; 500 V; 1 min Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum aplication temperature VALUE at 10 kHz 5 x 10-4 6 x 10-4 8 x 10-4 8 x 10-4 8x 10-4 1700 V/s 3300 V/s 1200 V/s 700 V/s 470 V/s > 100 000 M > 30 000 M > 440 V 1600 V; 1 min 2840 V; 1 min 105 C at 100 kHz 15 x 10-4 20 x 10-4 25 x 10-4 30 x 10-4 35 x 10-4
Vishay BCcomponents
URdc = 1000 V; URac = 350 V; Up-p = 1000 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL C-VALUE DIMENSIONS MASS C Pitch = 7.5 mm (bent back) Leads Leads w x h (h') x l (g) (1) 3.5 0.3 mm 25.0 2.0 mm Original pitch (F) O 500 mm O 356 mm (mm) ..YYY XX XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) Pitch = 15 mm Pitch = 7.5 mm (bent back) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm 0.0043 432 0.0047 472 0.0051 512 0.0056 562 0.0062 622 0.0068 682 0.0075 752 30... 34... 32... 33... 35... 5.0 x 11.0 (13.0) x 17.5 1.1 0.0082 822 (1250) (1000) (1100) (950) (550) 0.0091 912 0.01 103 0.011 113 0.012 123 0.013 133 0.015 153 0.016 163 183 0.018 30... 34... 32... 33... 35... 0.02 203 6.0 x 12.0 (14.0) x 17.5 1.4 (1000) (1000) (900) (800) (450) 0.022 223 0.024 243 0.027 273 30... 34... 32... 33... 35... 7.0 x 13.5 (15.5) x 17.5 1.8 0.030 303 (750) (500) (800) (700) (400) 0.033 333 363 0.036 35... 30... 34... 32... 33... 0.039 393 8.5 x 15.0 (17.0) x 17.5 2.5 (550) (300) (750) (500) (650) 0.043 433 0.047 473 0.051 513 30... 34... 32... 33... 35... 10.0 x 16.5 (18.5) x 17.5 3.3 0.056 563 (500) (450) (600) (500) (250) 0.062 623
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 7
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL MASS Leads Leads (g) (1) 3.5 0.3 mm 25.0 2.0 mm XX (SPQ) Pitch = 22.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.068 7.0 x 16.5 x 26.5 3.0 30 ... (200) 30... (200) 30... (200) 34... (250) 34... (250) 34... (200) XX (SPQ) Original pitch XX (SPQ) Pitch 22.5 mm 32... (550) 32... (450) 32... (350) Pitch = 27.5 mm 30... (100) 30... (100) 30... (100) 30... (100) 34... (125) 34... (125) 34... (125) 34... (100) 154 164 184 204 224 244 274 304 334 364 394 434 474 ..YYY
C (F)
DIMENSIONS w x h (h') x l (mm)
C-VALUE
683 753 823 913 104 114 124 134
0.075 8.5 x 18.0 x 26.0 4.2 0.082 0.091 0.1 0.11 10.0 x 19.5 x 26.0 5.3 0.12 0.13 Pitch = 27.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.15 11.0 x 21.0 x 31.0 8.0 0.16 0.18 0.2 13.0 x 23.0 x 31.0 9.7 0.22 0.24 0.27 15.0 x 25.0 x 31.0 12.6 0.3 0.33 0.36 0.39 18.0 x 28.0 x 31.0 16.3 0.43 0.47 Note (1) Net weight for short lead products only
SPECIFIC REFERENCE DATA (1400 Vdc)
DESCRIPTION Tangent of loss angle: C 0.016 F 0.016 F < C 0.039 F 0.039 F < C 0.13 F Rated voltage pulse slope (dU/dt)R: C 0.0056 F 0.0056F < C 0.016 F 0.016 F < C 0.039 F 0.039 F < C 0.1 F 0.1 F < C 0.13 F R between leads, for C 1 F at 500 V; 1 min R between leads and case; 500 V; 1 min Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum aplication temperature VALUE at 10 kHz 5 x 10-4 5 x 10-4 5 x 10-4 8000 V/s 15 000 V/s 4000 V/s 2100 V/s 1500 V/s > 100 000 M > 30 000 M > 500 V 2250 V; 1 min 2840 V; 1 min 105 C at 100 kHz 10 x 10-4 15 x 10-4 20 x 10-4
www.vishay.com 8
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 1400 V; URac = 500 V; Up-p = 1400 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL C-VALUE DIMENSIONS MASS C Pitch = 7.5 mm (bent back) Leads Leads w x h (h') x l (g) (1) 3.5 0.3 mm 25.0 2.0 mm Original pitch (F) O 500 mm O 356 mm (mm) ..YYY XX XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm Pitch = 15 mm Pitch = 7.5 mm (bent back) 222 0.0022 0.0024 242 0.0027 272 40... 44... 42... 43... 45... 5.0 x 11.0 (13.0) x 17.5 0.003 1.1 302 (1250) (1000) (1100) (950) (550) 0.0033 332 0.0036 362 0.0039 392 0.0043 432 0.0047 40... 44... 42... 43... 45... 472 6.0 x 12.0 (14.0) x 17.5 1.4 (1000) (1000) (900) (800) (450) 0.0051 512 0.0056 562 0.0062 622 0.0068 40... 44... 42... 43... 45... 682 7.0 x 13.5 (15.5) x 17.5 1.8 (750) (500) (800) (700) (400) 0.0075 752 0.0082 822 0.0091 912 0.01 40... 44... 42... 43... 45... 103 8.5 x 15.0 (17.0) x 17.5 2.5 (750) (500) (650) (550) (300) 0.011 113 0.012 123 133 0.013 45... 40... 44... 42... 43... 10.0 x 16.5 (18.5) x 17.5 3.3 0.015 153 (500) (250) (500) (450) (600) 0.016 163 Pitch = 22.5 mm Pitch = 22.5 0.4 mm; dt= 0.80 0.08 mm 183 0.018 40... 44... 42... 7.0 x 16.5 x 26.0 3 (200) (250) (550) 0.02 203 223 0.022 40... 44... 42... 8.5 x 18.0 x 26.0 4.2 0.024 243 (200) (250) (450) 0.027 273 303 0.03 0.033 333 40... 44... 42... 10.0 x 19.5 x 26.0 5.3 (200) (200) (350) 0.036 363 0.039 393 Pitch = 27.5 mm Pitch = 27.5 0.4 mm; dt= 0.80 0.08 mm 0.043 433 0.047 40... 44... 473 11.0 x 21.0 x 31.0 8 0.051 513 0.056 563 623 0.062 40... 44... 13.0 x 23.0 x 31.0 9.7 0.068 683 (100) (125) 0.075 753 823 0.082 40... 44... 15.0 x 25.0 x 31.0 12.6 0.091 913 (100) (125) 0.1 104 114 0.11 40... 44... 18.0 x 28.0 x 31.0 16.3 0.12 124 (100) (100) 0.13 134 Note (1) Net weight for short lead products only
Vishay BCcomponents
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 9
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (1600 Vdc)
DESCRIPTION Tangent of loss angle: C 0.015 F 0.015 F < C 0.15 F Rated voltage pulse slope (dU/dt)R: C 0.0056 F 0.0056 F < C 0.0075 F 0.0075 F < C 0.039 F 0.039 F < C 0.1 F 0.1 F < C 0.15 F R between leads, for C 1 F at 500 V; 1 min R between leads and case; 500 V; 1 min Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum aplication temperature URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL Pitch = 7.5 mm (bent back) Leads Leads Original pitch 3.5 0.3 25.0 2.0 O 500 mm O 356 mm XX (SPQ) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm 0.0027 0.003 5.0 x 11.0 (13.0) x 17.5 1.1 0.0033 0.0036 0.0039 0.0043 0.0047 6.0 x 12.0 (14.0) x 17.5 1.4 0.0051 0.0056 0.0062 7.0 x 13.5 (15.5) x 17.5 1.8 0.0068 0.0075 0.0082 0.0091 8.5 x 15.0 (17.0) x 17.5 2.5 0.01 0.011 0.012 10.0 x 16.5 (18.5) x 17.5 3.3 0.013 0.015 Pitch = 22.5 0.4 mm; dt= 0.80 0.08 mm 0.016 7.0 x 16.5 x 26.0 3.0 0.018 0.02 0.022 0.024 8.5 x 18.0 x 26.0 4.2 0.027 0.03 0.033 10.0 x 19.5 x 26.0 5.3 0.036 0.039 Note (1) Net weight for short lead products only XX (SPQ) XX (SPQ) Pitch = 15 mm 52... (1100) XX XX (SPQ) (SPQ) Pitch = 7.5 mm (bent back) 53... (950) 55... (550) C-VALUE ..YYY VALUE at 10 kHz 5 x 10-4 5 x 10-4 8000 V/s 15 000 V/s 3100 V/s 1800 V/s 1200 V/s > 100 000 M > 30 000 M > 660 V 2560 V; 1 min 2840 V; 1 min 105 C at 100 kHz 15 x 10-4 20 x 10-4
C (F)
DIMENSIONS w x h (h') x l (mm)
MASS (g) (1)
50... (1250)
54... (1000)
50... (1000)
54... (1000)
52... (900)
53... (800)
55... (450)
50... (750)
54... (500)
52... (800)
53... (700)
55... (400)
50... (750)
54... (500)
52... (650)
53... (550)
55... (300)
50... (500)
54... (450)
52... (600)
53... (500) Pitch = 22.5 mm
55... (250)
272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 113 123 133 153 163 183 203 223 243 273 303 333 363 393
50... (200)
54... (250)
52... (550)
-
-
50... (200)
54... (250)
52... (450)
-
-
50... (200)
54... (200)
52... (350)
-
-
www.vishay.com 10
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL Leads Leads Pitch = 7.5 mm (bent back) Original pitch 3.5 0.3 25.0 2.0 O 500 mm O 356 mm XX (SPQ) Pitch = 27.5 0.4 mm; dt= 0.80 0.08 mm 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 Note (1) Net weight for short lead products only 18.0 x 28.0 x 31.0 16.3 50... (100) 54... (100) 15.0 x 25.0 x 31.0 12.6 50... (100) 54... (125) 13.0 x 23.0 x 31.0 9.7 50... (100) 54... (125) 11.0 x 21.0 x 31.0 8 50... (100) 54... (125) XX (SPQ) XX (SPQ) XX (SPQ) Pitch = 27.5 mm 433 473 513 563 623 683 753 823 913 104 114 124 134 154 XX (SPQ) C-VALUE ..YYY
Vishay BCcomponents
C (F)
DIMENSIONS w x h (h') x l (mm)
MASS (g) (1)
SPECIFIC REFERENCE DATA (2000 Vdc)
DESCRIPTION Tangent of loss angle: C 0.01 F 0.01 F < C 0.1 F Rated voltage pulse slope (dU/dt)R: C 0.0036 F 0.0036 F < C 0.01 F 0.01 F < C 0.024 F 0.024 F < C 0.068 F 0.068 F < C 0.1 F R between leads, for C 1 F at 500 V; 1 min R between leads and case; 500 V; 1 min Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum aplication temperature VALUE at 10 kHz 5 x 10-4 10 x 10-4 11 000 V/s 20 000 V/s 4400 V/s 2500 V/s 1800 V/s > 100 000 M > 30 000 M > 750 V 3200 V; 1 min 2840 V; 1 min 105 C at 100 kHz 15 x 10-4 18 x 10-4
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 11
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 2000 V; URac = 700 V; Up-p = 2000 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL Pitch = 7.5 mm (bent back) Leads Leads Original pitch 3.5 0.3 25.0 2.0 O 500 mm O 356 mm XX (SPQ) Pitch = 15 mm 0.4 mm; dt = 0.80 0.08 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 Pitch = 22.5 0.4 mm; dt= 0.80 0.08 mm 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 Pitch = 27.5 0.4 mm; dt= 0.80 0.08 mm 0.027 0.03 0.033 0.036 0.039
(1)
C (F)
DIMENSIONS w x h (h') x l (mm)
C-VALUE ..YYY
MASS (g) (1)
XX (SPQ)
XX (SPQ) Pitch = 15 mm
XX XX (SPQ) (SPQ) Pitch = 7.5 mm (bent back)
102 112 122 132 60... (1250) 64... (1000) 62... (1100) 63... (950) 65... (550) 152 162 182 202 222 242 272 60... (1000) 64... (1000) 62... (900) 63... (800) 65... (450) 302 332 362 392
5.0 x 11.0 (13.0) x 17.5
1.1
6.0 x 12.0 (14.0) x 17.5
1.4
7.0 x 13.5 (15.5) x 17.5
1.8
60... (750)
64... (500)
62... (800)
63... (700)
65... (400)
432 472 512
8.5 x 15.0 (17.0) x 17.5
2.5
60... (750)
64... (500)
62... (650)
63... (550)
65... (300)
562 622 682 752
10.0 x 16.5 (18.5) x 17.5
3.3
60... (500)
64... (450)
62... (600)
63... (500) Pitch = 22.5 mm
65... (250)
822 912 103 113
7.0 x 16.5 x 26.0
3.0
60... (200)
64... (250)
62... (550)
-
-
123 133 153
8.5 x 18.0 x 26.0
4.2
60... (200)
64... (250)
62... (450)
-
-
163 183 203
10.0 x 19.5 x 26.0
5.3
60... (200)
64... (200)
62... (350)
Pitch = 27.5 mm
-
223 243 273
11.0 x 21.0 x 31.0
8.0
60... (100)
64... (125)
-
303 333 363 393
Note Net weight for short lead products only For technical questions, contact: dc-film@vishay.com Document Number: 28124 Revision: 05-Nov-08
www.vishay.com 12
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
C (F)
DIMENSIONS w x h (h') x l (mm)
MASS (g) (1)
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING LOOSE IN BOX REEL Leads Leads Pitch = 7.5 mm (bent back) Original pitch 3.5 0.3 25.0 2.0 O 500 mm O 356 mm XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) Pitch = 27.5 mm XX (SPQ)
C-VALUE ..YYY
Pitch = 27.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.10 Note (1) Net weight for short lead products only 18.0 x 28.0 x 31.0 16.3 60... (100) 64... (100) 15.0 x 25.0 x 31.0 12.6 60... (100) 64... (125) 13.0 x 23.0 x 31.0 9.7 60... (100) 64... (125)
433 473 513 563 623 683 753 823 913 104
SPECIFIC REFERENCE DATA (2500 Vdc)
DESCRIPTION Tangent of loss angle: C 0.015 F 0.015 F < C 0.056 F Rated voltage pulse slope (dU/dt)R: C 0.015 F 0.015 F < C 0.043 F 0.043 F < C 0.056 F R between leads, for C 1 F at 500 V; 1 min R between leads and case; 500 V; 1 min Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum aplication temperature 13 000 V/s 6 000 V/s 4200 V/s > 100 000 M > 30 000 M > 1000 V 3500 V; 1 min 2840 V; 1 min 105 C at 10 kHz 5 x 10-4 5x 10-4 VALUE at 100 kHz 10 x 10-4 15x 10-4
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 13
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
URdc = 2500 V; URac = 900 V; Up=p = 2500 V; C-tol. = 5 % CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING C (F) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (1) Leads 3.5 0.3 mm XX (SPQ) Pitch = 22.5 mm 0.4 mm; dt = 0.80 0.08 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 6.0 x 15.5 x 26.0 2.4 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 7.0 x 16.5 x 26.0 3.0 0.0068 0.0075 0.0082 0.0091 8.5 x 18.0 x 26.0 4.2 0.01 0.011 0.012 10.0 x 19.5 x 26.0 5.3 0.013 0.015 Pitch = 27.5 0.4 mm; dt= 0.80 0.08 mm 0.016 9.0 x 19.0 x 31.0 5.9 Leads 25.0 2.0 mm XX (SPQ) REEL H = 18.5 mm XX (SPQ) ..YYY C-VALUE
70... (200)
74... (250)
72... (600)
70... (200)
74... (250)
72... (550)
70... (200)
74... (250)
72... (450)
70... (200)
74... (200)
72... (350)
102 112 122 132 152 162 182 202 222 242 272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 113 123 133 153
70... (100) 70... (100)
74... (150) 74... (125)
163 183 203 223 243 273 303 333 363 393 433 473 513 563
0.018 0.02 11.0 x 21.0 x 31.0 0.022 0.024 0.027 13.0 x 23.0 x 31.0 0.03 0.033 0.036 15.0 x 25.0 x 31.0 0.039 0.043 0.047 18.0 x 28.0 x 31.0 0.051 0.056 Note (1) Net weight for short lead products only
8.0
9.7
70... (100) 70... (100) 70... (100)
74... (125) 74... (125) 74... (100)
-
12.6
16.3
www.vishay.com 14
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
MOUNTING
NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to "Packaging Information" www.vishay.com/docs?28139 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board:
* For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads * For larger pitches the capacitors shall be mounted in the same way and the body clamped
Vishay BCcomponents
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in the drawing:
* Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned * Product height with seating plane as given by "IEC 60717" as reference: hmax. h + 0.3 mm
bmax. = b + 0.3 mm Eccentricity
Imax. = I + 0.3 mm
STORAGE TEMPERATURE * Storage temperature: Tstg = - 25 C to + 40 C with RH maximum 80 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 15
MMKP 383
Vishay BCcomponents
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve) (1 kHz)
C/C (%) 4 1 kHz typical 10 Impedance () max. 10
0 2
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Impedance as a function of frequency (typical curve)
2
0
1.0 nF -2 10
-1
10 nF 100 nF
-4 min. -20 20 60 Tamb (C) 100
10-2
2.2 F
1.0 F
-6 - 60
10
-3
10
4
10
5
10
6
10
7
f (Hz)
10
8
Max. DC and AC voltage as function of temperature
factor 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 50 - 20 20 60 Tamb (C) 100
Max. RMS voltage as a function of frequency
10 AC voltage (V)
3
Max. RMS voltage as a function of frequency
10 AC voltage (V)
3
10
2
10
F 0n F 1020 nnF 20 F 47 00 n nF 10 200 2
2
F 0n F 10 0n F 22 70 n F 4 0n F 0n 10 00 22
Tamb 85 C, 250 Vdc 10 1 3 10 10
4
85 C Tamb 100 C, 250 Vdc
5
10
10
6
10
7
f (Hz)
10
8
10 1 2 10
10
3
10
4
10
5
10
6
f (Hz)
10
7
www.vishay.com 16
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
CHARACTERISTICS
Max. RMS voltage as a function of frequency
10
3
Vishay BCcomponents
Max. RMS voltage as a function of frequency
10 AC voltage (V) 10 2
3
AC voltage (V) 10
2
nF 47 0 nF F 10 0 n 22 0 nF F 47 0 n 0 10
Tamb 85 C, 400 Vdc 10 1 3 10 10
4
Max. RMS voltage as a function of frequency
10
3
AC voltage (V)
10
2
AC voltage (V)
Tamb 85 C, 630 Vdc 10 1 3 10 10
4
Max. RMS voltage as a function of frequency
10
3
AC voltage (V)
10
2
AC voltage (V)
Tamb 85 C, 1000 Vdc 10 1 3 10 10
4
Document Number: 28124 Revision: 05-Nov-08
nF 47 nF F 0 10 0 n F 22 0 n nF 47 00 10
85 C < Tamb 100 C, 400 Vdc
5
10
10
6
10
7
f (Hz)
10
8
10 1 2 10
10
3
10
4
10
5
10
6
f (Hz)
10
7
Max. RMS voltage as a function of frequency
10
3
10
2
nF 47 0 nFF 10 0 n F 22 0 n nF 47 00 10
nF 47 0 nFF 10 0 n F 22 0 n nF 47 00 10
10
5
10
6
10
7
f (Hz)
10
8
10 1 2 10
85 C < Tamb 100 C, 630 Vdc 10
3
10
4
10
5
10
6
f (Hz)
10
7
Max. RMS voltage as a function of frequency
10
3
nF 4.7 nF 10 2 nFF 2 7n F 4 0n F 1020 nnF 2 70 4
10
2
10
5
10
6
10
7
f (Hz)
10
8
10 1 3 10
85 C < Tamb 100 C, 1000 Vdc 10
4
For technical questions, contact: dc-film@vishay.com
nF 4.7 nF 10 nF 227 nF F 4 0n F 10 20 n nF 2 70 4
10
5
10
6
10
7
f (Hz)
10
8
www.vishay.com 17
MMKP 383
Vishay BCcomponents
CHARACTERISTICS
Max. RMS voltage as a function of frequency
10
3
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Max. RMS voltage as a function of frequency
10
3
AC voltage (V)
AC voltage (V)
nF 2.2.7 nF 4 0 nF F 1n 227 nF F 4 0n 10
nF 2.2.7 nF 4 nF 10 2 nFF 2 7 n nF 40 10
10
2
10
2
10 1 3 10
Tamb 85 C, 1400 Vdc 10
4
85 C < Tamb 105 C, 1400 Vdc
5
10
10
6
10
7
f (Hz)
10
8
10 1 2 10
10
3
10
4
10
5
10
6
f (Hz)
10
7
Max. RMS voltage as a function of frequency
10
3
Max. RMS voltage as a function of frequency
10
3
AC voltage (V)
AC voltage (V)
nF 4.7 nF 10 2 nFF 2 7 n nF 40 10
nFF 4.70 n nF 1 227 nF F 4 0n 10
10
2
10
2
10 1 3 10
Tamb 85 C, 1600 Vdc 10
4
85 C < Tamb 100 C, 1600 Vdc
5
10
10
6
10
7
f (Hz)
10
8
10 1 2 10
10
3
10
4
10
5
10
6
f (Hz)
10
7
Max. RMS voltage as a function of frequency
10
3
Max. RMS voltage as a function of frequency
10
3
AC voltage (V)
AC voltage (V)
nF F 1.0.2 n F 2 7n F 4. 0 n nF 1 227 nF F 4 0n 10
nF 1.0 nF 2.2.7 nFF 4 0 n nF 1 22 7 nF F 4 0n 10
10
2
10
2
Tamb 85 C, 2000 Vdc 10 1 3 10 10
4
85 C < Tamb 100 C, 2000 Vdc
5
10
10
6
10
7
f (Hz)
10
8
10 1 2 10
10
3
10
4
10
5
10
6
f (Hz)
10
7
www.vishay.com 18
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
CHARACTERISTICS
Max. RMS voltage as a function of frequency
10
3
Vishay BCcomponents
Max. RMS voltage as a function of frequency
10
3
AC voltage (V)
AC voltage (V)
nF 1.0 nF 2.2 nF 4.7 nF 10 nF 22 nF 47
nF 1.0.2 nF 2 nF 4.7 nF 102 nFF 2 7n 4
10
2
10
2
Tamb 85 C, 2500 Vdc 10 1 3 10 10
4
85 C < Tamb 105 C, 2500 Vdc
5
10
10
6
10
7
f (Hz)
10
8
10 1
10
2
10
3
10
4
10
5
10
6
f (Hz)
10
7
Insulaton resistance as a function of ambient temperature
Max. allowed component temperature rise (T) as a function of the ambient temperature (Tamb)
12 T (C) 8 4 0
106
105
104 0 20 40 60 80 Tamb (C) 100
RC (s)
- 50
- 20
20
60
Tamb (C)
100
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 19
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Tangent of loss angle as a function of frequency (typical curve)
Dissipation factor (x 10-4) 103
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
102
20 19 18 17
101
100 102
103
104
105
(Hz)
106
250 V C 0.091 F, curve 8 C 0.015 F, curve 9 C 0.022 F, curve 10 C 0.027 F, curve 11 C 0.033 F, curve 12 C 0.056 F, curve 15 C 0.082 F, curve 16 C 1.2 F, curve 18 C 1.61 F, curve 19 C 2.21 F, curve 20
400 V C 0.047 F, curve 5 C 0.068 F, curve 6 C 0.1 F, curve 7 C 0.2 F, curve8 C 0.24 F, curve 12 C 0.36 F, curve 13 C 0.43 F, curve 14 C 0.56 F, curve 16 C 1.1 F, curve 17
630 V C 0.033 F, curve 4 C 0.068 F, curve 5 C 0.1 F, curve 6 C 0.15 F, curve 7 C 0.22 F, curve 11 C 0.27 F, curve 12 C 0.47 F, curve 15 C 0.68 F, curve 16
1000 V C 0.01 F, curve 2 C 0.027 F, curve 3 C 0.047 F, curve 4 C 0.062 F, curve 5 C 0.075 F, curve 6 C 0.1 F, curve 7 C 0.15 F, curve 8 C 0.22 F, curve 9 C 0.3 F, curve 10 C 0.39 F, curve 11 C 0.47 F, curve 12 2500 V C 0.0047 F, curve 1 C 0.015 F, curve 2 C 0.056 F, curve 3
140 V C 0.0047 F, curve 1 C 0.016 F, curve 2 C 0.033 F, curve 3 C 0.051 F, curve 4 C 0.068 F, curve 5 C 0.082 F, curve 6 C 0.1 F, curve 7
1600 V C 0.0047 F, curve 3 C 0.0091 F, curve 4 C 0.068 F, curve 5 C 0.01 F, curve 6 C 0.15 F, curve 7
2000 V C 0.0047 F, curve 2 C 0.033 F, curve 3 C 0.1 F, curve 4
HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/C Wmax. (mm) 4.0 5.0 6.0 7.0 8.5 10.0 11.0 13.0 15.0 18.0 HEAT CONDUCTIVITY (mW/C) PITCH 15 mm 10 11 12 16 18 PITCH 22.5 mm 19 21 25 28 PITCH 27.5 mm 36 42 48 57
www.vishay.com 20
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification "HQN-384-01/101: Technical Information Film Capacitors". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P/G: * T = Component temperature rise (C) * P = Power dissipation of the component (mW) * G = Heat conductivity of the component (mW/C)
Vishay BCcomponents
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URdc) 2. The peak-to-peak voltage (UP-P) shall not be greater than 22 x URac to avoid the ionisation inception level 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled:
dU dU 2 x ------- x dt < U Rdc x ------- dt rated dt
0 T 2
T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits (see graph max. allowed component temperature rise). 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: "Heat Conductivity"
Document Number: 28124 Revision: 05-Nov-08 For technical questions, contact: dc-film@vishay.com www.vishay.com 21
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE
ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temperature RMS-overvoltage (< 24 h) Maximum peak voltage (VO-P) (< 2 s) Tamb 85 C URac 1.25 x URac 1.6 x URdc 85 C < Tamb 105 C URac 1.25 x URac 1.1 x URdc
EXAMPLE
C = 4 nF - 1600 V used for the voltage signal shown in next drawing. UP-P = 1000 V; UP = 900 V; T1 = 12 s; T2 = 64 s; T3 = 4 s The ambient temperature is 80 C. In case of failure, the oscillation is blocked. Checking conditions: 1. The peak voltage UP = 900 V is lower than 1600 Vdc 2. The peak-to-peak voltage 1000 V is lower than 22 x 550 Vac = 1600 UP-P 3. The voltage pulse slope (dU/dt) = 1000 V/4 s = 250 V/s This is lower than 8000 V/s (see specific reference data for each version) 4. The dissipated power is 35 mW as calculated with fourier terms and typical tgd. The temperature rise for Wmax. = 6.0 mm and pitch = 15 mm will be 35 mW/11 mW/C = 3.2 C This is lower than 10 C temperature rise at 80 C, according graph. 5. Oscillation is blocked 6. Not applicable Voltage Signal
Voltage Up
Up-p Time T3 T1 T2
www.vishay.com 22
For technical questions, contact: dc-film@vishay.com
Document Number: 28124 Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
INSPECTION REQUIREMENTS
General Notes: Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-17 and specific reference data". Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 4.3.1 Dimensions (detail) Initial measurements Capacitance Tangent of loss angle: For C 1 F at 100 kHz or for C > 1 F at 10 kHz Tensile: Load 10 N; 10 s Bending: Load 5 N; 4 x 90 Method: 1A Solder bath: 280 C 5 C Duration: 10 s Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min 0.5 min Recovery time: Min. 1 h, max. 2 h Visual examination Capacitance Tangent of loss angle No visible damage Legible marking |C/C| 1 % of the value measured initially Increase of tan 0.0005 for: C 100 nF or 0.001 for: 100 nF < C 470 nF or 0.0015 for: C > 470 nF Compared to values measured in 4.3.1 No visible damage As specified in chapters "General Data" of this specification CONDITIONS PERFORMANCE REQUIREMENTS
Vishay BCcomponents
4.3 4.4
Robustness of terminations Resistance to soldering heat
4.14
Component solvent resistance
4.4.2
Final measurements
SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements Capacitance Tangent of loss angle: For C 1 F at 100 kHz or for C > 1 F at 10 kHz Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5.0 min 0.5 min A = - 55 C B = + 105 C 5 cycles Duration t = 30 min Visual examination Mounting: see section "Mounting" for more information Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 h No visible damage Legible marking
4.15
Solvent resistance of the marking
4.6
Rapid change of temperature
4.7
Vibration
No visible damage
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 23
MMKP 383
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 4.7.2 Final inspection 4.9 Shock
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
CONDITIONS PERFORMANCE REQUIREMENTS
4.9.3
Final measurements
Visual examination Mounting: See section "Mounting" for more information Pulse shape: Half sine Acceleration: 490 m/s Duration of pulse: 11 ms Visual examination Capacitance Tangent of loss angle
No visible damage
Insulation resistance SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 4.10.4 4.10.6 Damp heat cyclic Test Db, first cycle Cold
No visible damage |C/C| 1 % of the value measured in 4.6.1 Increase of tan 0.0005 for: C 100 nF or 0.001 for: 100 nF < C 470 nF or 0.0015 for: C > 470 nF Compared to values measured in 4.6.1 As specified in section "Insulation Resistance" of this specification
Temperature: + 105 C Duration: 16 h
Temperature: - 55 C Duration: 2 h
Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements
Voltage proof = URdc for 1 min within 15 min after removal from testchamber Visual examination Capacitance
No breakdown of flash-over No visible damage Legible marking For original pitch = 22.5 mm and 27.5 mm: |C/C| 3 % of the value measured in 4.4.2 or 4.9.3 Increase of tan 0.0005 for: C 100 nF or 0.001 for: 100 nF < C 470 nF or 0.0015 for: C > 470 nF Compared to values measured in 4.3.1. or4.6.1 50 % of values specified in section "Insulation Resistance" of this specification
Tangent of loss angle
Insulation resistance SUB-GROUP C2 4.11 4.11.1 4.11.3 Damp heat steady state Initial measurements Final measurements 56 days, 40 C, 90 % to 95 % RH no load Capacitance Tangent of loss angle at 1 kHz Voltage proof = URdc for 1 min within 15 min after removal from testchamber Visual examination Capacitance Tangent of loss angle
No breakdown of flash-over No visible damage Legible marking |C/C| 1 % of the value measured in 4.11.1. Increase of tan 0.0005 for: C 100 nF or 0.001 for: 100 nF < C 470 nF or 0.0015 for: C 470 nF Compared to values measured in 4.11.1 50 % of values specified in section "Insulation Resistance" of this specification Document Number: 28124 Revision: 05-Nov-08
Insulation resistance
www.vishay.com 24
For technical questions, contact: dc-film@vishay.com
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST SUB-GROUP C3A 4.12.1 Endurance test at 50 Hz alternating voltage Duration: 2000 h 1.25 x URdc at 105 C Capacitance Tangent of loss angle: For C 1 F at 100 kHz or for C > 1 F at 10 kHz Visual examination Capacitance Tangent of loss angle No visible damage Legible marking |C/C| 5 % compared to values measured in 4.12.1.1 Increase of tan 0.0005 for: C 100 nF or 0.001 for: 100 nF < C 470 nF or 0.0015 for: C > 470 nF Compared to values measured in 4.12.1.1 50 % of values specified in section "Insulation Resistance" of this specification CONDITIONS
Vishay BCcomponents
PERFORMANCE REQUIREMENTS
4.12.1.1 Initial measurements
4.12.1.3 Final measurements
Insulation resistance SUB-GROUP C4 4.2.6 Temperature charcteristics Initial measurements Intermediate measurements Final measurements Capacitance Capacitance at - 55 C Capacitance at 20 C Capacitance at + 105 C Capacitance Insulation resistance 4.13 Charge and discharge 10 000 cycles Charged to URdc Discharge resistance: U Rdc R = -----------------------------------------------5xCx ( 2.5xdU dt ) 4.13.1 Initial measurements Capacitance Tangent of loss angle: For C 1 F at 100 kHz or for C > 1 F at 10 kHz Capacitance Tangent of loss angle
For - 55 C to + 20 C: + 1 % |C/C| 3.75 % or for 20 C to 105 C: - 6 % |C/C| 0 % As specified in section "Capacitance" of this specification. As specified in section "Insulation Resistance" of this specification
4.13.3
Final measurements
|C/C| 1 % compared to values measured in 4.13.1 Increase of tan 0.0005 for: C 100 nF or 0.001 for: 100 nF < C 470 nF or 0.0015 for: C > 470 nF Compared to values measured in 4.13.1 50 % of values specified in section "Insulation Resistance" of this specification
Insulation resistance
Document Number: 28124 Revision: 05-Nov-08
For technical questions, contact: dc-film@vishay.com
www.vishay.com 25
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of MMKP38308

	To Download MMKP38308 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .